Commit Graph

679 Commits

Author SHA1 Message Date
noname a48f2be7f5 Use MODBIT in xseturgency. 2014-04-28 18:38:06 +02:00
noname 17fa1493ee Compute ena_sel as one expression. 2014-04-28 18:38:06 +02:00
Roberto E. Vargas Caballero a8a9e66a7d Simplify expressions in tputc() 2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero 17290f493b Fix misplaced break
This misplaced break was causing an incorrect fall through
from DSR to DECSTBM.
2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero 43d74ef362 Create a function for DEC test
Almost of the sequences execute their action in a separate function,
which is good because helps to read the full set of sequences
faster.
2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero 3764f38fc8 Fix tputc control code handling
The patch 53105cf modified how control codes were detected, because
it tried to handle also C1 control codes (0x80-0x9f), that have
upper bit to 1, so they are multi byte character in utf8.
Code was checking the value of width in order to known that after
decoding the unicode point had a width of 1 byte, but it as incorrect
because this width is the columnb width.
2014-04-28 18:32:09 +02:00
Roberto E. Vargas Caballero 53105cf74f Remove repeated initialisation of term.esc
Once a sequence is completed term.esc must return to 0, so
instead of repeating this expression in all the cases is
better put it at the end of the block.
2014-04-27 11:30:21 +02:00
Roberto E. Vargas Caballero aa35bbd7a1 Cancel DCS with SUB, CAN, ESC or any CC1 code
From http://www.vt100.net/docs/vt510-rm/chapter4:

	*The VT510 ignores all following characters until it receives a
	 SUB, ST, or any other C1 control character.

So OSC, PM and APC sequence ends with a SUB (it cancels the sequence
and show a question mark as error), ST or any another C1 (8 bits)
code, or their C0 (7 bits) equivalent sequences (at this moment we
do not handle C1 codes, but we should). But it is also said that:

	Cancel  CAN
	1/8     Immediately cancels an escape sequence, control sequence,
		or device control string in progress. In this case, the
		VT510 does not display any error character.

	Escape  ESC
	1/11    Introduces an escape sequence. ESC also cancels any escape
		sequence, control sequence, or device control string in
		progress.
2014-04-27 11:30:13 +02:00
Markus Teich 704d12442e add break;s for last cases in switch statements 2014-04-27 10:34:57 +02:00
noname 02d2df5790 Do not eat ESC character if control string is not properly terminated.
Currently tputc handles the case of too long control string waiting for
the end of control string.

Another case is when there is ESC character is encountered but is not
followed by '\\'.  In this case st stops processing control string,
but ESC character is ignored.

After this patch st processes ESC characters in control strings properly.

Test case:
printf '\e]0;abc\e[1mBOLD\e[0m'

Also ^[\ is actually processed in the code that handles ST.
According to ECMA-048 ST stands for STRING TERMINATOR and is used to
close control strings.
2014-04-26 00:14:42 +02:00
noname c4b79b055d Fix for multibyte characters in techo.
Works for both signed and unsigned char.
2014-04-26 00:03:09 +02:00
noname 7f1e02e4db s/DSC/DCS/ DCS stands for DEVICE CONTROL STRING 2014-04-26 00:03:09 +02:00
noname 84f6dbffa5 Use xwrite instead of write. 2014-04-26 00:03:08 +02:00
noname 2d67f99d28 Remove unnecessary break 2014-04-26 00:03:08 +02:00
noname 4a8574b439 Comment fix. 2014-04-25 23:57:44 +02:00
Colona 8f11e1cd03 On terminal resize, clear the alt screen with its own cursor.
Currently the alternate screen get messed up on resize if it has
different colors or mode.
2014-04-25 23:57:44 +02:00
noname 844c503c80 Optimize tputtab.
Before this patch executing
	printf '\e[10000000000I'
or
	printf '\e[10000000000Z'
resulted in long delay.
2014-04-25 23:57:44 +02:00
noname 1b0b9759dc Use != instead of ^ for logical values.
sel.alt is only changed by
	sel.alt = IS_SET(MODE_ALTSCREEN);
2014-04-25 23:57:43 +02:00
noname 99d2d6007a Use BETWEEN macro in xsetcolorname and fix style. 2014-04-25 23:57:43 +02:00
Christoph Lohmann fe31a3f634 Conformity in the -g geometry handling.
Thanks to Yuri Karaban for suggesting this!

These changes make -g correspond to <cols>x<rows> and honor it so non-tiling
window managers can work with the size hints afterwards. It also adds a -i
flag to force the window size. This is needed so -g keeps being useful in dwm.
2014-04-25 22:34:24 +02:00
Roberto E. Vargas Caballero 6b7f63bac5 Simplify a bit more tdeletechar and tinsertblank
The large and repeated expression used in memmove to indirect
the line can be simplified using a pointer, that makes more
clear where begins and where ends the movement.
2014-04-25 17:25:59 +02:00
noname 80b32af794 Simplify tdeletechar and tinsertblank and fix memory corruption.
Current CSI parsing code uses strtol to parse arguments and allows them
to be negative. Negative argument is not properly handled in tdeletechar
and tinsertblank and results in memory corruption in memmove.

Reproduce with printf '\e[-500@'

Patch also removes special handling for corner case and simplifies
the code.

Removed
	term.dirty[term.c.y] = 1
because tclearregion sets dirty flag.
2014-04-25 17:17:48 +02:00
noname 16ac85bf54 Style fixes in tscrollup. 2014-04-23 20:38:04 +02:00
noname fe527aa508 Do not set dirty flag twice in tscrollup and tscrolldown. 2014-04-23 20:37:59 +02:00
noname 3afdb4ff04 Use tsetdirt in tscrollup and tscrolldown.
tscrollup and tscrolldown do not use tsetdirt, but their code is
equivalent to

        tsetdirt(orig, term.bot-n);
        tsetdirt(orig+n, term.bot);

tclearregion also marks cleared lines as dirty.
In tscrolldown it sets lines from term.bot-n+1 to term.bot dirty, and in
tscrollup it sets lines from orig to orig+n-1 dirty.

In both functions all lines from orig to term.bot are effectively set
dirty, but in tscrolldown lines from orig+n to term.bot are set dirty
twice, and in tscrollup lines from orig to term.bot-n are set dirty
twice.

These patches make it clear which lines are set dirty and sets them
dirty once in each funciton.
2014-04-23 20:35:16 +02:00
noname f9dc374ea0 Fix techo handling of control and multibyte characters.
techo compares signed char to '\x20'. Any character with code less then
'\x20' is treated as control character.  This way characters with MSB
set to 1 are considered control characters too.

Also this patch makes techo display DEL character as ^?.

To reprocuce the bug, enable echo mode using printf '\e[12l',
then type DEL character or any non-ASCII character.
2014-04-23 20:31:45 +02:00
noname fa19f241a3 Make xrealloc and xstrdup style consistent. 2014-04-23 15:39:04 +02:00
noname df1810dd8f Use BETWEEN in tsetchar. 2014-04-23 15:39:03 +02:00
noname ed855ea432 Use uint and uchar instead of unsigned int and unsigned char. 2014-04-23 15:39:03 +02:00
noname 68d97457ec Remove argument names from function prototypes. 2014-04-23 15:39:03 +02:00
noname 49672dac7b Style fix in tdumpsel. 2014-04-23 15:39:02 +02:00
noname f21e47f44a Use BETWEEN in tinsertblankline and tdeleteline. 2014-04-23 15:39:02 +02:00
Christoph Lohmann 87abc7cd59 It's 2014 now. 2014-04-22 19:22:58 +02:00
noname@inventati.org 1388870331 move MODBIT to Macros section
Patch moves MODBIT to macros section and uses it in tselcs.
2014-04-20 21:13:37 +02:00
noname@inventati.org 6b56cbf9cc misplaced parenthesis in LEN macro 2014-04-20 21:07:04 +02:00
Markus Teich 3269bf213d remove confusing SERRNO macro
I found the SERRNO Macro slightly confusing, since you have to look
it up, if you don't know it already. A web search showed it does
not seem to be any kind of standard. Also there was no reason in
the commit log when it was introduced in 2009. As you can see it
also leads to new patches, which don't use this macro (probably the
author did not know about it).
2014-04-20 21:00:46 +02:00
noname@inventati.org 4ad2fc7f18 Simplify techo
Remove special case for \e because it is handled well by "control code"
case.
2014-04-15 08:16:39 +02:00
noname@inventati.org dc74c4f729 typedefs instead of #defines
Replaced #defines with typedefs where possible, patch attached.
2014-04-15 08:14:46 +02:00
q@c9x.me b8d6171cb0 fix cursor handling when alt screen is disabled
I don't like this alt screen thing, but when
allowaltscreen == 0, the cursor is still saved
and restored after calling 'less' (or 'man').

This patch makes allowaltscreen == 0 usable.
2014-04-15 08:13:41 +02:00
Roberto E. Vargas Caballero ebb6e03201 Merge remote-tracking branch 'origin/master' into omaster 2014-04-15 08:11:47 +02:00
Christoph Lohmann f27b44b7c2 Removing two unnecessary gettimeofday(). 2014-04-11 18:11:25 +02:00
Toaster Toaster 3cb80840db Increment XSync consistency
This patch cleans up a style inconsistency.
2014-04-11 16:29:13 +02:00
Roberto E. Vargas Caballero c46d929fe1 Fix Backspace and Delete characters
Backspace key must generate the backspace character (\010) and
Delete key must generate the delete character (\0177). In
some systems the kernel configuration for erasing previous character
is \0177, so some programs (for example cat, ed, mail, ...), can not
understand the correct meaning of backspace. In this cases it is only
needed this command:

	stty erase 
2014-04-11 15:08:37 +02:00
Christoph Lohmann 0baf2d8be5 0.5 release. 2014-04-05 20:40:11 +02:00
Christoph Lohmann 62f9142478 Updating the TODO in preparating for 0.5. 2014-04-05 20:39:46 +02:00
Christoph Lohmann a495fce128 There is no need for a full dirt redraw. 2014-04-05 20:34:57 +02:00
Christoph Lohmann 6f4cfa5136 Fixing a compiler warning with the assignment. 2014-04-02 09:26:28 +02:00
Rafa Garcia Gallego 672e4e4b03 Fix segfault when pressing PrintScr without a selection 2014-03-27 07:48:32 +01:00
Damian Okrasa 45b808b88e new utf decoder
This patch replaces current utf decoder with a new one, which is ~50
lines shorter and should be easier to understand. Parsing 5 and 6
sequences, if necessary, requires trivial modification of UTF_SIZ
constant and utfbyte, utfmask, utfmin, utfmax arrays.
2014-03-27 07:19:37 +01:00
Roberto E. Vargas Caballero 71328cbcdc Merge branch 'master' of ssh://suckless.org/gitrepos/st 2014-03-10 15:16:26 +01:00